Bare Metal Programming Kinetis KL25 ARM Cortex-M0+ Processor

🌟 Course Headline: Mastering the Embedded Firmware Programming using NXP KL25 Freedom Development Board (FRDM-KL25) 🌟

Unlock the Secrets of Bare Metal Programming on the ARM Cortex-M0+ Processor!

🚀 Course Introduction: Embark on a journey into the world of embedded systems and microcontroller programming with our comprehensive online course. Dive deep into the capabilities of the Kinetis KL25 Freedom Development Board (FRDM-KL25) and master the art of bare metal programming on the ARM Cortex-M0+ processor. This is not just a course; it's a deep dive into the intricacies of hardware interfacing, real-time systems, and the power of embedded firmware development with NXP's cutting-edge technology.

📚 What You'll Learn:

1. ARM Cortex-M0+ Processor Architecture and Bus Models:

• Understand the architecture and working principles of the ARM Cortex-M0+ processor.
• Learn about the different bus models and how they interact within the microcontroller.

2. Kinetis KL25 Micro Controller:

• Get to know the Kinetis KL25 microcontroller, its features, and how it stands out from other ARM Cortex-M processors.

3. MCUXpresso IDE and NXP Kinetis KL25 Freedom Development Platform:

• Set up and familiarize yourself with the MCUXpresso Integrated Development Environment (IDE).
• Explore the capabilities of the NXP Kinetis KL25 Freedom Development Platform.

4. General Purpose Input/Output (GPIO):

• Master the use of GPIO pins for various applications and interfacing with external components.

5. Interrupt Handling, Vectors, and Service Routines:

• Learn how to efficiently handle interrupts, set up vector tables, and write service routines for different interrupt sources.

6. Timer (KL25 Low Power Timer, Periodic Interrupt Timer):

• Discover the power of timers in creating timing events, pulse generation, and periodic tasks.

7. DHT11 Temperature / Humidity Sensor:

• Integrate a DHT11 sensor to measure temperature and humidity data using the KL25.

8. Analog to Digital Convertor (ADC):

• Understand the ADC module, its configuration, and how to perform analog measurements.

9. MH MQ-2 Gas Sensor:

• Learn to interface with an MH MQ-2 gas sensor for detecting various gases.

10. Inter Integrated Circuit (I²C) Interface:

• Master the I²C protocol for fast, low-power, two-wire serial communication.

11. MMA8451 Accelerometer:

• Explore the MMA8451 accelerometer and its application in measuring acceleration forces.

12. Universal Asynchronous Receiver Transmitter (UART):

• Gain expertise in serial communication with the UART peripheral for data transfer between devices.

13. USB-UART TTL Interface and Teraterm Access:

• Connect the FRDM-KL25 to your PC using a USB interface for monitoring and controlling serial communication with tools like Teraterm.

By the end of this course, you will have a solid understanding of how to program embedded systems, interact with various sensors and peripherals, and develop real-time applications on the ARM Cortex-M0+ processor using the Kinetis KL25 development platform. You'll be well-equipped to tackle any project that requires low-power embedded processing and system-level design.

Why Take This Course?

• Hands-On Learning: Apply what you learn in real-time with practical exercises.
• Expert Guidance: Learn from Hariharan Veerappan, an experienced course instructor with a deep understanding of embedded systems and ARM microcontrollers.
• Community Support: Join a community of like-minded learners and enthusiasts to exchange ideas, share projects, and solve challenges together.

🎓 Enroll Now and Start Your Journey in the World of Embedded Systems with Confidence! 🎓